vendredi 18 octobre 2013

CLASSIC YACHT: GERMAINE 1882, Ben Nicholson's design

GERMAINE 1882
The oldest C&N yacht sails again


In October 1996 ClassicBoat magazine celebrated their 100th issue by selecting the 100 best classic yachts. In his contribution, Ian Dear picked Germaine, a near wreck with an exceptional pedigree: a gaff yawl built in 1882 by Ben Nicholson. William Kirk left not much of her at the time except for a forlorn hull on a Gosport parking lot, and a lovely period photograph.

By François Chevalier - English translation: Patrick Bigand

©François Chevalier -  Sail plan of Germaine, drawn from period pictures based on period 
Germaine cruising during the 19th century – Patrick Bigand Collection
Germaine had been found by Camper and Nicholsons somewhere on an Essex mud berth and brought to Gosport to be restored in preparation for their bicentennial in 1982, as a symbol of their first century of existence. Unfortunately the boatyard did not make it to 200 years, the land was sold to a marina developer, and Germaine was left on the premises, without spars or ballast.

©François Chevalier - Germaine’s sections are typical of the « plank on edge » designs that were popular in England at the time


At the time when ClassicBoat issue 100 appeared, Patrick Bigand lived in Oxford, and reading Ian Dear’s story he felt Germaine, at 42 ft. LOD, would be an ideal flagship for his collection of small sailing and rowing classics. He could already picture her moored in front of his house in Douarnenez. 

A wealthy yachtsman, F.W Leybourne Popham owned many yachts. Germaine was among the smallest in his fleet
Through Ian Dear, he got in touch with Mark Bowden, head of Marina Development, and bought Germaine for a symbolic pound. Germaine was soon moved to Lowestfot to be restored by the International Boatbuilding Training College, and Patrick contacted me to ask for my help preparing a full set of plans, since none was available any more as the C&N archives has been destroyed in a fire.

©François Chevalier - Sawn oak frames, pitch-pine planking, teak topsides, weight is not a factor for this type of construction
I went to Lowestoft and took all necessary measurements on the hull and collapsed deck. I then drew the lines, and followed with all structural, deck and sail plans.

Work started, and went slowly: progress was tied to classes programs and schedules. Furthermore if not judged perfect, a job had to be redone.

©François Chevalier - The master section, a classic design
Meanwhile Patrick got a new assignment in Portland Oregon, left Europe for several years, and eventually came back to France in late 2002. The IBTC saw changes in owners and management, and Germaine at times was not the highest priority. Nevertheless Germaine slowly regained her former glory.

©François Chevalier - Mahogany interior, the companionway located well forward of the cockpit allows for a roomy owner’s cabin. The galley and head are forward, as was customary at the time

©François Chevalier - The long coach roof give ample headroom for the aft and main cabins. The companionway is athwart ships to starboard, an arrangement often found in England on boats designed for inshore sailing. A hydraulic transmission has been used to allow the engine to be installed in the forward cockpit, in a transversal position
©François Chevalier - Detail of the companionway. Access remains easy, even when the boat is heeling
©François Chevalier - Detail of the skylight
©François Chevalier - Detail of the forward hatch

At last, on May 28 2013, Germaine was launched again on lake Lothing, with Eleonore Salter, great great grandniece of F.W Leybourne Popham, her first owner, in attendance.

The launch on May 28 2013 in Lowestoft
 Nadia and Patrick Bigand placed a silver coin under the mainmast, and champagne was brought to celebrate Germaine’s rebirth, and the 453 students who contributed to it.


During the celebration, a worried Patrick called me; Germaine was way too high on the water!


I had to remind him that she is an 1882 design: at the time a sizeable part of the ballast was inside. Three additional tons of lead soon restored her proper trim.

After some final finishing and rigging work, the elegant yawl left the North Sea shores for her new homeport of Douarnenez, which she reached on September 15th 2013 at the end of a 450 nautical miles maiden voyage.







Germaine Main data

Designer and builder: Ben Nicholson
Launched: June 21th, 1882
First owner: F. W. Leybourne-Popham
Refit designer: François Chevalier
Builder: IBTC (International Boat building Training College), Lowestoft
LOD: 12,83 m
LWL: 10,20 m
Beam: 2,90 m
Displacement: 18 tons
Ballast: 5 tons lead under the keel + 3 tons inside the boat
Draft: 2, 05 m
Rig: yawl gaff rig
Sail area: 135 m2 (windward)
Air draft with topmast: 16,60 m
Engine: diesel Vetus 42 cv inboard, with hydraulic transmission 
Materail: pitchpin, teak, oak frames
Superstructures: teak
Mats and spars: Oregon pine

jeudi 17 octobre 2013

MAGIC CARPET 3

MAGIC CARPET 3, 

DERNIER DES 100 PIEDS..., 

PREMIER A L'ARRIVEE


Magic Carpet 3 a convaincu dès sa première régate. C’est grâce à des formes très particulières que l’architecte réussi a obtenir une bombe. Par petit temps comme dans la brise, il surclasse tous ses concurrents.

Par François Chevalier

François Chevalier©2013. Magic Carpet 3 sail plan


En relevant le bouchain dit évolutif, il réduit considérablement la largeur de flottaison lors que le voilier est à plat, limitant au maximum la surface mouillée.

François Chevalier©2013. Magic Carpet 3 lines


Reichel / Pugh avaient fait le tour des voiliers étroits avec Wild Oats XI, qui a reçu toutes les configurations d’appendices possibles, en commençant par une version canard. En relevant le bouchain dit évolutif, ils réduisent considérablement la largeur de flottaison lors que le voilier est à plat, limitant au maximum la surface mouillée. Comme la jauge Wally interdit la quille basculante, Reichel / Pugh ont opté pour un déplacement relativement important, avec une grande partie du poids dans le lest. À la gîte, la coque glisse sur une surface plate, s’appuie sur son bouchain et déjauge dès le moindre souffle. On retrouve ces formes sur les derniers 40 pieds Open, qui sont des voiliers plus délicats à optimiser que leurs prédécesseurs.

François Chevalier©2009/2012. Wild Oats XI lines

Plus étroit, le plan de forme de Wild Oats XI fait apparaitre une coque avec des fonds légèrement arrondis, des flancs assez évasés, une flottaison très étroite (4,10 m) et un creux de coque positionné en avant de la quille. À la gîte, la flottaison utilise bien toute la longueur du voilier, la surface mouillée est réduite, mais les flans évasés ne jouent pas le rôle de plan anti-dérive comme sur les carènes plus récentes munies de bouchain comme Magic Carpet 3 ou Rambler 100 de Juan Kouyoumdjian
.

François Chevalier©2011. Rambler 100 lines



Le tracé des formes de Rambler 100 se rapproche plus du bateau à moteur. Ses lignes sont tellement tendues qu’il n’est pas évident de lire les formes arrières sur les sections. De ce fait, les lignes d’eau, parallèles à la flottaison, se terminent presque toutes au tableau arrière. Plus le bateau est large, plus le développé de la coque et du pont est important, induisant un poids supplémentaire. Mais plus la forme du pont se rapproche du triangle, moins ce développé intervient sur le poids de la coque et Rambler 100 ex-Speedboat n’est pas bien loin du triangle. La moitié du poids du voilier se trouve dans le lest qui bascule à l’extérieur de la coque au vent. Si le vent vient à monter, 8 mètres cube de ballast d’eau de mer viennent calmer le jeu, ce qui lui confère un moment de redressement peut courant. 

François Chevalier©2011. Maxi Scow lines


Mon projet de Maxi Scow de 100 pieds présente des formes proches de celles d’une planche à voile. Cela induit plus de traînée dans le petit temps que sur un voilier étroit comme Wild Oats XI, mais une plus grande faculté à planer dès que le vent donne. A la gîte, la surface mouillée diminue, l’angle entre l’axe de la nouvelle flottaison et celle du voilier est plus petit que sur n’importe quel autre maxi, et la raideur de forme plus importante.

Une confrontation de ces quatre Maxi dans une Course des Bermudes, un Fastnet ou un Sydney-Hobart serait un spectacle inoubliable et plein d’enseignements.


DATA

Magic Carpet 3 / WallyCento

Architecte : Reichel Pugh Yacht Design
Chantier : Wally Europe
Construction : Carbone
Conforme à la jauge WallyCento
Longueur : 30,48 m - 100’
Flottaison : 29,49 m
Bau : 7,19 m
Bau à la flottaison : 4,70 m
Tirant d’eau : 6,20/4,50 m
Déplacement : 50 t
Quille rétractable
Tirant d’air : 45 m

Wild Oats XI

Maxi
Sloop
Architectes : Reichel Pugh Yacht Design
Constructeur : McConaghy, Sydney
Baptême : 2 décembre 2005
Longueur : 30,48 m
Longueur hors tout : 33,83 m
Longueur à la flottaison : 29,70 m
Bau : 5,40 m
Bau à la flottaison : 4,10 m
Longueur du mât : 44,10 m
Tirant d’eau : 5,50 m
Poids : 32 t
Lest : 14 t
Surface de la GV : 382 m2
Surface du foc : 228 m2
Surface du génois : 505 m2
Surface grand spi : 880 m2

Rambler 100 (ex-Speedboat)

Architecte : Juan Kouyoumdjian

Chantier : Cookson Boat, Auckland (N-Z)

Mise à l'eau : 17 avril 2008

Longueur : 29,99 m
Flottaison : 29,99 m

Bau : 7 m

Bau à la flottaison : 4,95 m
Tirant d'eau : 5,70 m

Tirant d'air : 46,50 m

Bout-dehors : 3,60 mètres

Déplacement : 30,6 tonnes

Lest : 15 tonnes

Ballast : 8 tonnes
Voilure au près : 630 m2

Voilure au portant : 1 340 m2


MaxiScow 100

Architecte : Francois Chevalier YD
Chantier : Multiplast (Vannes), Green Marine (UK) ou Cookson Boats (NZ) de préférence
Longueur : 30,48 m - 100’
Flottaison : 26,70 m
Bau : 7,20 m
Bau à la flottaison : 5,40 m
Tirant d’eau : 5,60 m
Déplacement : 38 t
Quille pendulaire
Tirant d’air : 46 m
Voilure, GV + foc solent : 628 m2
Voilure, GV + genaker : 1110 m2